UKCA declaration of incorporation
210.00 | PZN-plus | Assembly and Operating Manual | en | 389374 67
9 UKCA declaration of incorporation
in accordance with the Supply of Machinery (Safety) Regulations 2008.
Manufacturer/
Distributor
SCHUNK Intec Limited
Clamping and gripping technology
3 Drakes Mews, Crownhill
MK8 0ER Milton Keynes
We hereby declare that on the date of the declaration the following partly completed machine
complied with all basic safety and health regulations found in the
"Supply of Machinery (Safety) Regulations 2008".
The declaration shall be rendered invalid if modifications are made to the product.
Product designation: 3-Finger Centric Gripper / PZN-plus / pneumatic
ID number 0303308 ... 0303648
The partly completed machine may not be put into operation until it has been confirmed that
the machine into which the partly completed machine is to be installed complies with the
provisions of the "Supply of Machinery (Safety) Regulations 2008".
Applied harmonized standards, especially:
EN ISO 12100:2010 Safety of machinery - General principles for design -
Risk assessment and risk reduction
The special technical documentation according to AnnexVII, Part B, belonging to the partly
completed machine, has been created.
Person authorized to compile the technical documentation:
Marcel Machado, address: refer to manufacturer's address
Lauffen/Neckar, March 2024 Dr.-Ing. Manuel Baumeister,
Head of Systems Engineering,
Technology & Innovation
To Next Page
Loading...
Need help?
General
