Mounting / connection / programming of the AFS3 138 PMI
18 01.00|1372106_AFS3 138 PMI_AFS3 138 MMS |en
Note:
The programming device with order no. 9988354 that is required
to program the position measuring system is available as
additional accessory and is not included in the scope of delivery of
the AFS3 138 PMI.
Via an interface, two switching outputs "S1 + S2" are provided to
the user for clamping condition monitoring.
• "Open" clamping module
• "Clamped" clamping module
• "Clamped without clamping pins" clamping module
Connection assignment
Connection assignment
Technical data positioning system PMI
Electrical specifications
Signal conditions
To Next Page
Loading...
