SCHUNK VERO-S - 6 Mounting; Connection; Programming of the AFS3 138 PMI; Installing the AFS3 138 PMI to the NSE 138 (-V1) (-K)

Mounting / connection / programming of the AFS3 138 PMI
01.00|1372106_AFS3 13
8 PMI_AFS3 138 MMS |en
15
Mounting / connection / programming of the AFS3
138 PMI
Installing the AFS3 138 PMI to the NSE 138 (-V1) (-K)
The AFS3 138 PMI is installed on a VERO-S NSE3. The system is
supplied partially assembled. Step-by-step installation instructions
makes assembly of the multi-part monitoring unit easier.
Adjustment of the monitoring sensors is described in chapter 11
( 12, Page 36)
. For the description, refer to the assembly
drawing in chapter 10 ( 11, Page 34) and the parts list in chapter
9 ( 10, Page 33).
6
6.1