Schwinn 430 - Step 2: Attach Rail Assembly to Frame Assembly

9
Press any key to exit test
 h. RUNLCDTEST–Drives3x5and1x5LCDdisplayswiththefollowingpatterns:
1. All segments on
2. All segments off
  3. Setindividualsegmentsoneatatimeuntilallsegmentsareilluminated.
Press any key to exit.
i. RESET CONSOLE – Resets the data from user inputs. The Console setup, user records and workout records will
beresettodefaults.ThisoptiondoesnotresetMFGNVM(nonvolatilememory).
13. The Console display shows the Software Version prompt.
14. For the next prompt, push the OK button.
15 . The Console will display the Power-Up Mode screen.