Page 3
TABLE OF CONTENTS
SECTION DESCRIPTION PAGE #
7.10A Square Tube Shear Installation 56
7.10B Square Tube Shear Operation 56
7.11 Optional Punch and Die Holders 58
7.11A 2-1/2" & 3" Die Inserts 58
7.11B Offset Die Holder 58
7.11C 6 x 6 Die Holder 58
7.11D # 45 Punch Retaining Nut 58
7.11E Heavy Duty Split Ring Retaining Nut 59
7.12 Optional Gauging Equipment 60
7.12 48 Inch Deluxe Back Gauge 60
7.13 Urethane Stripper 60
8.0 TROUBLE SHOOTING GUIDE 65-69
8.1 Electrical Trouble Shooting-Motor 65
8.2 Limit Switch Inspection 66
8.3 Control Valve Inspection 66
8.4 Hydraulics 67
8.5 Cylinder Seal Replacement 68
9.0 IRONWORKER PARTS LISTS 70-89
9.1 Shear Arm Assembly (Ser. #7815 & Up) 70
9.2 Punch Assembly 72
9.3 Stripper Assembly 74
9.4 Upper Arm Assembly 76
9.5 Stroke Control Assembly 78
9.6 Hold Down Assembly 80
9.7 Cylinder Assembly 82
9.8 Connecting Link Assembly 83
9.9 Power Unit 84
9.10 Electrical Unit 86
9.11 Urethane Stripper 88
To Next Page
Loading...
