January 2015 Page 15
Prodigy Cuber System Information
Overall System Type:
• Refrigeration: Mechanical, either air cooled, water cooled or remote cooled.
• Water System: Inlet water solenoid valve lls reservoir once per cycle. Purge solenoid valve opens to
discharge some reservoir water once per cycle.
• Control System: Electronic
• Harvest cycle sensor: Conductivity probe
• Water full/empty sensor: Conductivity probe
• Bin Control: Curtain Switch
• Ice type: Unied
• Harvest system: Hot gas defrost with mechanical assist
Electrical Components:
• Compressor
• Contactor
• Water Pump
• Inlet Water Solenoid Valve
• Purge or purge Valve
• Fan Motor(s)
• Fan motor pressure control
• High pressure cut out – certain AC models only
• Harvest Assist Solenoid(s)
• Hot Gas Valve(s)
• Controller
• Transformer – 12v AC for the controller only
• Water Level Sensor
• Ice Thickness Sensor
• Curtain Switch(es)
To Next Page
Loading...