EC4 series integrated I/O user manual Use
Copyright © Nanjing Solidot Electronic Technology Co., LTD. 2023
5 Installation and Disassembly
Installation\disassembly precautions
Ensure that the cabinet is well ventilated (e.g., equipped with a fan).
Do not install this equipment near or above any equipment that may cause overheating.
Make sure to install modules vertically and maintain adequate clearance between the modules and
nearby devices.
Installation/disassembly operation may only be carried out after the power supply is cut off.
In order to maintain normal heat dissipation of the modules, make sure to install them vertically to
ensure smooth airflow inside them.
To Next Page
