sDot EC4 Series - Faq

EC4 series integrated I/O user manual Use
Copyright © Nanjing Solidot Electronic Technology Co., LTD. 2023
73
8 FAQ
8.1 Failure to find a device in the software
1. Confirm that the ESI profile is installed correctly.
2. Confirm that the ESI profile, version is accurate.
3. Whether to restart the Twin CAT software after installing the ESI profile.
8.2 Failure to start operation of a device
1. Confirm whether the project is established correctly.
2. Confirm the relevant setting of the node station number.
3. Make ify the power supply is normal.
4. EtherCAT The communication line is normal.
5. Re-power the device after changing from the device node address.