❶ Access to the guided TankTest mode
❷ Usage reminders
❸ User choice: Leak simulator.
In practice, the leak simulator is used at the
end of the test as a functional test of the
equipment, in the presence of a calibrated
flow.
By choosing yes, a message will explicitly ask
you to use this equipment at the end of the
vacuum measurements.
Refer to the regulations in place in your
country to know if this functional test tool is
mandatory or optional.
❹ Go to the next step with the F3 key
The next screen invites the operator to choose a memory location where the measurements associated
with the TankTest test will be stored.
To Next Page
Loading...
