42
Throttle/Shift Lever
FORWARD
The throttle/shift lever should be in the
forward position in order for the craft
to advance.
To obtain forward, depress throttle/
shift lever button then gradually push
lever to increase craft speed.
FORWARD FULL THROTTLE POSITION
1. Throttle/shift lever button
NEUTRAL
To obtain neutral, pull throttle/shift le-
ver halfway until it locks. The reverse
gate will be in the middle position, di-
recting half of the thrust toward the
front of the craft to minimize craft move-
ment.
NEUTRAL POSITION
TYPICAL
1. Reverse gate in middle position
WARNING
When the craft is in neutral posi-
tion, the impeller is turning.
F10L2XY
1
F10L2YY
F10L26Y
1
lmo2001-004a.book Page 42 Friday, November 3, 2000 3:27 PM