TROUBLE SHOOTING
Advises
Make sure all Safeties are turned ON
All N.C. contacts must have jumpers
Problem Found Possibile Cause Solutions
Motor doesn’t respond to any
START impulse
Gate doesn’t move while the
motor is running
Gate doesn’t reach the complete
Open / Closed position
The gate opens but doesn’t
close
The gate doesn’t close
automatically
a.) Jumper missing on one of the N.C.
Contacts
b.) Burnt fuse
a.) The motor is in the released position
b.) There is an obstacle
a.) Pause time set to high
b.) Control unit in semi-autom. logic
a.) Wrong setting of the limit switches
b.) Error on programming
c.) Gate is stopped by an obstacle
d.) Torque or speed too low
a.)
.) Ammeter alarm
The contacts of the photocells are open.
b.) The stop contact is open
c.) The edge contact is open
d
a.) Check the connections or the jumpers on the
connections of the safety edge, of the stop and
of the photocell
b.) Replace the burned fuse on the control unit
a.) Re-lock the motor
b.) Remove obstacle
a.) Adjust pause time
a.) Set limit switches
b.) Repeat programming
c.) Remove obstacle
d.) Increase torque parameter
a.) b.) c.) Check the jumpers or the signals
indicated on the warning lamp
d.) Check if the ammeter alarm has intervened and
eventually increase the torque parameter.
USER 1 - 24V DG
b.) Set the pause parameter on a different value
from the
D sb
23
International registered trademark n. 2.777.971
GENERAL WARNING: Installation must be realized using parts and accessories approved by SEA. SEA is not responsible for incorrect installations and/or non-
compliance with safety standards according to the law in-force. SEA is in no way liable for any damages and/or malfunctioning due to using parts and
accessories non-compliant with the UL325 safety standards.
ORDERS: Orders are processed upon approval by SEA. Buyers must confirm orders by sending a written Purchase Orders to SEA. Purchase Orders are
intended as confirmation of orders and binding for the buyer, which accepts SEA sales condition.
QUOTATION: Quotation and special offers with a non-specified duration expires automatically after 30 days.
PRICES: Prices are based on the Price List in force. Discounts and quotation from Sales Rep. and other selling branches must be approved by SEA. Prices are
F.O.B SEA Warehouse in Miami and do not include shipments costs. SEA reserves the right to modify the price list at any time and provide notice to its sales
network.
PAYMENT: Method of payments and terms are notified by SEA and displayed on the commercial invoice.
DELIVERY: The delivery time on the invoice is not binding and represents an estimated delivery. Shipments costs will be charged to the buyer and SEA is not
responsible for delays and/or damages occurred to the products during shipment.
COMPLAINS: Complains and/or claims must be notified to SEA within 7 business days after receiving the products. Claims and complains must be supported by
original documents. Customer must contact the factory for instructions and authorization. Merchandise returned for credit must be current, uninstalled and
unused and returned in its original packaging. Freight must be pre-paid on all authorized returns.
REPAIRS: Repairs and parts are subject to the availability in stock. Shipment of products for repairs must be pre-paid by the customer. Products shipped without
authorization, sender’s details and description of the problems will be refused. Customers must contact SEA for instructions.
WARRANTY: for the original buyer only:
Hydraulic and oil-bath motors: 36 months warranty from the date of invoice on manufacturing, assembling and workmanship defects.
Electro-mechanic motors and electronic control systems: 24 months warranty from the date of invoice on manufacturing, assembling and workmanship defects.
Lepus and Full Tank Standard model: 60 months warranty from the date of invoice on manufacturing, assembling and workmanship defects.
No warranty will be recognized for damages due to incorrect installation and/or improper use for which the product was intended. SEA warranty obligations shall
be limited to repair or replace the defective product/parts at SEA option, upon examination of the products by SEA technical Staff. All replaced parts must remain
property of SEA. The warranty status of the product remains an unquestionable assessment of SEA. Buyer must ship pre-paid defective products. Products
under warranty will be returned pre-paid by SEA. Recognized defects, whatever their nature, will not produce any responsibility and/or damage claims to SEA
USA Inc and SEA s.r.l. Warranty shall not cover any required labor activities. Warranty will in no case be recognized if alterations and any other changes will be
found on products. Warranty will not cover damages caused by carriers, expendable materials and faults due to improper use with the products specifications.
No indemnities are recognized during repairing and/or replacing of the products under warranty. SEA USA Inc. and SEA s.r.l. decline any responsibility for
damages to person and objects deriving from non-compliance with safety standards, installation instructions or use of the products sold. It is intended that
warranty will be recognized only on products bought through the SEA authorized network. Products must be installed by professionals. No warranty will be
recognized if products are installed directly by the final user. Warranty does not apply in case of unexpected events such as fire, flood, electrical power surge,
lightning, vandalism and others.
SEA USA Inc. is not responsible for errors in technical information printed in catalogs and installation manuals.
SALES CONDITIONS
67411535
www.ReliableGateOpeners.com | (800) 878-7829 | sales@ReliableGateOpeners.com
To Previous Page
Loading...
