IMPORTANT NOTICE
IMPORTANT NOTICE
This bulletin must be used in conjunction with the PREDELIVERY CHECK LIST enclosed in the shrink pack.
WARNING
To obtain limited warranty coverage, predelivery procedures must be performed by an authorized
Sea-Doo water
craft dealer/distributor. Apply all necessary torques as indicated.
— The informa
tion and c omponents/system descriptions contained in this document are correct at the
time of publication. However, BRP maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on products previously manufactured.
— Due to late changes, there might be some differences between the manufactured product and the
descriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
— The illu
strations in this document show the typical construction of the different
assemblies and may not reproduce the full detail or exact shape of the parts; however,
they represent parts that have the same or similar function.
— The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model year service training.
— Further information or inquiries should be directed to your distributor service
repre
sentative and/or specific SHOP MANUAL sections.
— Please complete the PREDELIVERY CHECK LIST for each watercraft and retain a purchaser signed copy.
— Make sure the purchaser receives the OPERATORS GUIDE, PREDELIVERY CHECK
LIST signed copy and SAFETY VIDEOCASSETTE.
WARNING
Tor
que wrench tightening specifications must be strictly adhered to. Where specified,
install new locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a
locking device is impaired, it must be renewed.
Predelivery 2007-2 3 / 22
To Next Page
Loading...
Need help?
General
