UNCRATING
UNCRATING
Crate Cover
Model(s): All
22
1
F00A2A6
Carefully lay crate on its bottom.
CAUTION: A
llowing crate to drop may cause
serious damage to watercraft.
Remove all screws [1] retaining crate
cover to crate base.
Assisted by another person, lift up crate cover [2].
NOTE: Do not tip cover toward front or back
of water
craft. Raise cover vertically [2] from
both ends at the same time.
Remove watercraft protective bag.
Remove parts from watercraft's s torage
compartments and from crate.
Lifting the Watercraft
Model(s): All
Cut strapping at watercraft front eyelet.
Release shipping bracket at rear of watercraft
from crate base.
Lift watercraft using appropriate lift kit and
insta
ll it on a proper support.
Engine Foam Protector
Model(s): International
Remove seat(s).
1
F18P016
Remove the foam protector [1] supporting engine.
Shipping Bracket
Model(s): All
1 32
F08A066
Remove
shipping bracket [1] from venturi.
Discard shipping bracket and hexagonal bolts [2].
Keep t
he flat washers [3] located between
bracket and pump.
4 / 22 2007-2 Predelivery
To Next Page
Loading...
