SPECIFICATIONS
SPECIFICATIONS
Technical Specifications
MODEL RXT RXP
ENGINE
Engine Type
1503 SCIC (215
hp)
Number of Cylinder
3
Induction Type Mechanically driven supercharger with intercooler
Engine Revolu
tion Limiter Setting ±50 RPM
8000
Intake Valve 2 x 38 mm per cylinder
Exhaust Valve 2 x 31 mm per cylinder
Lubrication 10W-40 motor o
il (P/N 219 700 346)
FUEL SYSTEM
Fuel Injection Type Multiport sequential, (52 mm) throttle body
Idle Speed (in water)
±50 RPM
1800
Throttle Posi
tion (TPS)
1.6 k
-2.4k
Crankshaft Position (CPS)
190
- 290
Manifold Air Temperature (MAT S) 2.280 k -2.740k @ 20°C
Water Tempera
ture (WTS)
2.280 k
-2.74
0k
Manifold Air P
ressure (MAP S )
6040 k
(terminals 2- 1)
5554 k
(termi
nals 3- 2)
5822 k
(terminals 3- 1)
Sensors Typical
Resistance
Exhaust Gas T
emperature (EGTS)
2.280 k -2.7
40 k
Fuel Injector
11.4 k
- 12. 6 k @ 20°C
Gas Grade / Octane
RECOMMENDED: Optimum performances: PREMIUM unleaded 91 octane (RON + M O N) / 2 (North America)
95 RON (outside North Am erica)
Minimum: REG
ULAR unleaded 87 octane (RON + MO N) / 2 (North Am erica)
91 RON (ou tside North Am erica)
ELECTRICAL
Ignition Sy
stem Type
Non adjusta
ble timing
Digital, In
ductive Type
Make and Type
NGK – DCPR8E
Spark Plug
Gap
0.7 - 0 .8 mm (0.028 - 0.031 in)
PROPULSION
Propulsion System
BRP Formula Pump
Jet Pump Type Axial flow single stage
Transmission Direct drive
Jet Pump Grease Type Therma Lube XL- O LC2-002
Minimum Required Water Level 90 cm (35 in)
Impeller
Outside D iameter / Material
159 mm (6.259 in) / Stainless steel
LIQUIDS
Fuel Tank Capacity (including reserve) L (U.S. gal.)
60 (15.9)
Cooling Sys
tem Capacity
L(U.S.qt.)
5.5 (5)
Engine Oil Capacity L (U.S. qt.)
4.5 (4.8) for a dry engine
3.0 (3.2) af
ter first oil change
Impeller Shaft Reservoir Capacity (mL (U.S. oz))
10 (0.34) at front of bearing, 50 (1.7) at rear of bearing, 50 (1.7) at pump cap.
20 / 22 2007-2 Predelivery
To Next Page
Loading...
Need help?
General
