Seagate FreeAgent - Editing Sync Settings; Checking Sync Status; Deleting Sync Settings

Seagate Manager User Guide for Use With Your FreeAgent Drive 30
Synchronizing Folders Editing Sync Settings
Step 3: In each window, select the location at which to store the synchronized folders on
this computer and click OK.
From now on, the selected folders will automatically sync with the versions on
your Seagate FreeAgent drive each time you connect the drive to the computer.
Editing Sync Settings
To change any of your Sync settings:
Step 1: Click Sync in the Command panel.
The Sync window opens.
Step 2: Click Edit Sync Settings.
The Folder Selection window displays your current folder settings.
Step 3: Add and/or remove folders from Sync and click Next.
Folders removed from Sync are deleted from your FreeAgent drive.
The File Types window displays your current file type settings.
Step 4: Make the desired changes and click Next.
The Sync Options window displays your current Rules settings.
Step 5: Make the desired changes and click Finish.
Checking Sync Status
To check the status of a Sync,
Step 1: Click Sync in the Command panel.
The Sync window opens.
Step 2: Click Check Sync Status.
The Sync Status window opens.
Listed are the names of the computers on which Sync was set up, the date of the
last Sync, and the Automatic Sync setting (On or Off).
Step 3: Click OK to return to the Sync window.
Deleting Sync Settings
To delete all your Sync settings and create a new set:
Step 1: Click Sync in the Command panel.
The Sync window opens.