Figure 5.26
The number “x/x...” to the upper right corner of the screen
indicates the maximum frames that can be recorded and the
number of recorded frames.
6) The scan tool keeps recording PID data until user presses the
ESC button, selected memory location is full, or it completes
recording. A message prompting to playback data shows on the
screen.
Figure 5.27
If you wish to playback recorded data, press the OK button; if
you do not wish to playback, press the ESC button, or use
LEFT/RIGHT button to select NO and press the OK button
to return to Record Data menu.
Recording Custom Data Set
1) To record customised data, use the UP/DOWN scroll button to
select Custom Data Set from Record Data menu and press the
OK button. (Figure 5.20)
Record Data
Recording Done!
Playback data?
YES NO
…….Recording…. 5/46 …..
DTC_CNT 0
FUELSYS1 0L
FUELSYS2 -- ?
LOAD_PCT(%) 0.0
ETC(℃) -40
SHRTFT1(%) 99.2
To Next Page
Loading...
