SeaSTAR 3610 - Page 31

SeaSTAR 3610 USER MANUAL
Issue 2.3 02/11
21
Figure 1 Entering the DPS setup file
4. Select System|NavEngine standard.
5. The figure below displays a default view for the Input/Output communication
before any interface details are added.
Figure 2 Input/Output view before interface details are added
6. Select a DGNSS link and configure the I/O type to match with the output of the
3610 Demodulator. It is possible to define several correction links in the DPS
and the 3610 Demodulator system. The links can be set up to decode RTCM
or HP/XP/G2.
1005600PMA0