66 •
17-10-07-649-100a/04-2018S
3. Disinfect the device:
► Moisten a soft cloth with disinfectant and wipe down the device.
► Comply with the intervals: see table.
Measuring rod (if present) 1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet (active ingredient: quaternary ammonium compounds, for example).
2. Follow the instructions on the disinfectant.
3. Disinfect the device:
► Moisten a soft cloth with disinfectant and wipe down the device with
it.
► Comply with the intervals, see table.
6.3 Sterilizing
This device may not be sterilised.
7. FUNCTION CHECK
► Perform a function check prior to each use.
A complete function check includes:
• visual inspection for mechanical damage
• checking the alignment of the device
• visual and function check of the display elements
• function check of all the controls shown in the section entitled
“Overview”
• function check of optional accessories
If you notice any faults or deviations during the function check, first try to
resolve the error with the aid of the section entitled “What do I do if ...” in this
document.
Interval Component
Before every measurement Tray
After every measurement Tray
If required
Display elements,
controls, housing
Interval Component
Before every
measurement
Head stop, foot stop
After every
measurement
Head stop, foot stop
If required
• Controls
•Housing
• Measuring rod with scale
To Next Page
Loading...
