Secure Pipit 500 Consumers Manual

25
Advanced settings
Advanced settings
Important: You will require the PIN code to change advanced settings.
By touching the Advance button on the Settings
screen will give you access to advanced setups
such as setting the indicative tariff.
Use this button sparingly and
with caution as the stored
usage data once erased
cannot be retrieved.
Press to manually
join/leave the HAN network.
Press to setup indicative tariff
rate for your electricity usage.
Press to define your daily electricity generation capacity
that the display unit will use to decide the scaling on your
electricity generation dial.
Press to change the CO2
avoidance factor.
Press to setup indicative tariff
rate for your electricity
generation (e.g. Solar).
Advance
HAN is the home area network built
into your Smart Meter and Pipit 500.

Secure Pipit 500 Specifications

General

Brand	Secure
Model	Pipit 500
Category	Monitor
Language	English