Secure Pipit 500 Consumers Manual

32
Carbon emissions
Carbon avoidance factor
The default CO2 avoidance factor defined in your Pipit is 1.36 kg for each kWh produced from a carbon source. To
change it, select the new value from this keypad and press OK. To be able to change the existing CO2 factor you
will be prompted to enter a PIN code. The new value will be saved only if you have entered the correct PIN. Press
Cancel to retain the existing value and return to the Advance Settings menu.
This CO2 Factor button on the Advanced Settings
screen allows you to define the CO2 avoidance
factor. Pipit uses this value to decide the scaling on
your CO2 kg/hour dial.
CO2 Factor
This is how much CO2 kg per
kWh defined in your Pipit.

Secure Pipit 500 Specifications

General

Brand	Secure
Model	Pipit 500
Category	Monitor
Language	English