Need help?Do you have a question about the Seg System A2 H15 and is the answer not in the manual?
General| Brand | Seg |
|---|---|
| Model | System A2 H15 |
| Category | Controller |
| Language | English |
Provides an overview of the controller's basic functions and features.
Details the main components of the belt scale system for sensing and measurement.
Instructions for protecting and storing the System A2 during shipment and use.
Guidance on selecting an installation location and environmental considerations for the controller.
Details EMC protection and CE compatibility requirements for cable installation.
Describes the procedure for connecting various electrical cables to the weighing system.
Instructions for installing the optional 90-230Vac/24Vdc power module.
Standardized connection technique for load cells using 6-conductor cables.
Steps for powering up the controller and engaging the backup battery.
Information on RS485 interface, Modbus protocol, and printer connection.
Explains the process of entering parameters for basic operation and initial setup.
A checklist of items to verify before initiating the controller's start-up procedure.
Step-by-step guide for entering necessary data during the start-up process.
Describes the functions of the front panel keys and display indications.
Explains the meaning of symbols and indications shown on the LCD display.
Lists common error messages and basic troubleshooting steps.
Details how to initiate and what information is provided by the printout function.
Overview of the menu system structure and access to submenus.
Detailed explanation of various parameters within the INFORMATION and SYSTEM DATA menus.
Technical specifications covering design, display, power, connections, and inputs/outputs.
Instructions for cleaning and maintaining the controller's housing.
Information regarding waste electrical and electronic equipment regulations.
Details the product's compliance with restriction of hazardous substances.
States compliance with relevant EU directives and EMC requirements.
Formal declaration of product conformity to EU directives and standards.
To Next Page