Seg System A2 H15 User Manual

6. TECHNICAL INFORMATION
6.1 Menu system overview:
Push frontkey D for access to the menusystem. Scroll to the desired menu with frontkeys C or D.
Push key B (Ent) to access desired sub menus or parameters.
The SYSTEM DATA and NEW STARTUP menu can be protected with a numerical password. If entered, the
password will be asked for when the menu is being accessed. Note that the password will only be asked for once
for every session inside the menusystem. When the menusystem is exited and reentered, the password will be
asked for again. Entering a password code, will also protect zerosetting of Subtotaliser 2 from the front panel.
A2-H15 menusystem:
18-08-16 S44-H15E 6-1
S-E-G SYSTEM A2-H15 INSTRUCTION
NEW STARTUP ->
Restore
Ld.Cell=
At mV/V=
TotUnit=
Tacho?=
Idl.Spc=
PulsLen=
BeltLen=
Run Blt
Save
INFORMATION ->
Speed
Load
mV/V
mA Out
Tare
TotPart
Sub1Part
Sub2Part
Serial#
System
Prog.date
SYSTEM DATA ->
Angle=
TopDisp=
BkLight=
LoadLev=
FlowLev=
Spd.Lev=
FlowFlt=
mA Max=
AutZERO=
CutOff=
AutZMax=
SysZERO
TotZERO
SPAN ADJUST ->
Cur.Adj=
Val Now=
New Val=
Change
TIME SETUP ->
Year=
Month=
Day=
Hour=
Minute=
TimeSet
COM SETUP ->
BPS=
Format=
ID=
AutoPrn=
PW-Code=
Reg=
Reg.Val=
Backup

Seg System A2 H15 Specifications

General

Brand	Seg
Model	System A2 H15
Category	Controller
Language	English