Seg System A2 H15 User Manual

18-08-16 S44-H15E 1-1
S-E-G SYSTEM A2-H15 INSTRUCTION
Table of contents
1. GENERAL 1-2
1.1 System description 1-2
1.2 Belt scale parts 1-2
1.3 Delivery & storage 1-3
2. MECHANICAL INSTALLATION 2-1
2.1 Mechanical installation 2-1
3. ELECTRICAL INSTALLATION 3-1
3.1 General 3-1
3.2 Terminal connections 3-1
3.2.1 Optional 90 - 230Vac/24Vdc module 3-2
3.3 Loadcell connection 3-3
3.4 Power up 3-5
3.5 Serial communication and printout 3-6
4. COMMISSIONING and start-up 4-1
4.1 General description 4-1
4.2 Checklist prior to start-up 4-2
4.3 START-UP procedure 4-3
5. DAILY OPERATION 5-1
5.1 Front Panel 5-1
5.2 Error indications 5-2
5.3 Printout 5-3
6. TECHNICAL INFORMATION 6-1
6.1 Menu system overview: 6-1
6.2 Parameter explanations 6-2
6.3 Controller Specifications 6-7
7. MAINTENANCE 7-1
7.1 Housing maintenance 7-1
8. CE Compliance and Harmonized Standards 8-1
8.1 WEEE Compliance 8-1
8.2 RoHS Compliance 8-1
8.3 CE Compliance 8-1
8.4 EC Declaration of Conformity 8-2
This instruction contains all necessary information to perform a successfull installation, connection and start-up
procedure of the instrumentation.
In order to fully understand the procedures and actions involved, we would like you to spend some time reading
this instruction carefully before installation and operation of this product.
If you should have any further questions, please contact your local S-E-G representative.
The contents of this manual is believed to be correct at the time of printing, the manufacturer reserves the right to
change the contents without notice if so required.
NOTE! This manual is valid for firmware version: June 29 2015. (Indicated in display at power up)

Seg System A2 H15 Specifications

General

Brand	Seg
Model	System A2 H15
Category	Controller
Language	English