Sega Dinosaur King - ASSEMBLY AND INSTALLATION

−  − −  −
−  − −  −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
● Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
● Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specied performance.
● Ensure that connectors are accurately connected. Incomplete connections can
cause electric shock.
● Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of re.
● This work should be performed by the site maintenance individual or other
skilled professional. Performing work by non-technical personnel can cause a
severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation.
● Provide sufcient space so that assembling can be performed. Performing work
in places with narrow space or low ceiling may cause an accident and assembly
work to be difcult.
● To perform work safely and avoid serious accidents such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
Handle molded parts with care. Excessive weight or pressure may cause them to
break and the broken pieces may cause injury.
6. ASSEMBLY AND INSTALLATION
When carrying out the assembling and installation, follow the following 6-item sequence.
󱦯SECURING IN PLACE (ADJUSTER ADJUSTMENT)
󱦱POWER SUPPLY AND EARTH CONNECTION
󱦳ASSEMBLING THE POP
󱦵 INSERTING THE MANAGEMENT CHIP AND DINOSAUR KING CARDS (See Section 7)
󱦷POWERING ON
󱦹ASSEMBLY CHECK
WARNING
！
CAUTION
！
Tools and Implements Required for the Work
Phillips screwdriver (for M4 screws)
Master key
Spanner with a jaw width of 24 mm
(for M16 hexagon bolts)