− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
● The Key Chip is a precision device. It can be damaged by heat, impact, and
static electricity. Exercise caution in handling this equipment.
● A Key Chip must be used as a set with a board or Compact Flash of the same
title.
STOP
IMPORTANT
Insert the Key Chip into the hole on the upper surface of the SystemSP board’s plating. Pay
attention to the facing of the Key Chip and be sure it is pushed all the way in.
Press the end of the Key Chip inwards and draw it out from the hole in the SystemSP boards
plating.
After removal keep the Key Chip in the box provided. Always store it together with the game
board or Compact Flash that it is paired with.
10−8 KEY CHIP
FIG. 10.8
Insertion
Removal