− 0 − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
MAINSWITCH
EARTHTERMINAL<TAIWAN>
Connectwiththeindoorearthterminal.
INLET
CIRCUITPROTECTOR
ACCABLE(POWERCORD)
TotheACoutlet
(Scale:1/50)Seethelayoutforthe
positioninglocation.
Ventilationspace
(15cmminimum)
FIG. 6.1e Ensuring Ventilation SpaceFIG. 6.1d
POWER SUPPLY AND EARTH CONNECTION
● Be sure to independently use the power supply socket outlet equipped with
an Surge Suppressor. Using a power supply without a Surge Suppressor can
cause a re when electric leakage occurs.
● Ensure that the "accurately grounded indoor earth terminal" and the earth
wire cable are available (except in the case where a power cord plug with
earth is used). This product is equipped with an earth terminal. Connect the
earth terminal and the indoor earth terminal with the designated cable. If the
grounding work is not performed appropriately, customers can be subjected to
an electric shock, and the product may not function properly.
● Ensure that the power cord and earth wire are not exposed on the surface
(passage, etc.). If exposed, they can be caught and are susceptible to damage.
If damaged, the cord and wire can cause electric shock and short circuit
accidents. Ensure that the wire is not in the customer's way and that the wiring
has protective insulation.
● After wiring the power cord on the oor, be sure to protect the power cord.
An exposed power cord is susceptible to damage and may cause an electric
shock.
WARNING
!
The AC unit is located at the back of the cabinet.
The AC unit features a main switch, a circuit protector, and an inlet for connecting the power cord.
FIG. 6.2a
Main SW off.
Ensure that the main switch is OFF.