Sega Dinosaur King - COMPOSITION OF THE GAME BOARD

−  − −  −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
−  − −  −
The DIP SW (Dip switches) and JP (Jumper switches) on the game board must be
set as specied below. If any other settings of these switches are used it may lead
to an unclear picture or other errors.
3 2 1
JP5
JP6
JP7
JP8
JP9
● The game board is very delicate equipment. Shaking or dropping it may cause
an accident or malfunction.
● Release of static electricity has the potential to damage electronic parts on
the IC base board. Before opening the shield case and starting work, touch an
earthed metal surface to release any static electricity stored in your body.
● Before exchanging the game board rst read this manual and any other relevant
documentation in full
SW3
JP5〜9
GAME BD SP DKG EXP (834-14493-02)
DIP SW Setting
The DIP SW for this product should be set as shown in
the following diagram.
JP (Jumper) Setting
The JP for this product should be set as shown in the
following diagram.
19−2 COMPOSITION OF THE GAME BOARD
WARNING
！
STOP
IMPORTANT
FIG.19.2a
FIG.19.2b
FIG.19.2c