− − − −
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ERROR 104: Management Chip data error 1
[DISPLAY] ERROR 104
RFID UNKNOWN ERROR
(If the error occurs in Test Mode, “UNKNOWN CHIP FORMAT” is displayed)
[CAUSE] The inserted Management Chip is not for the correct machine or game version.
[COUNTERMEASURES] Verify again that the Management Chip is correct.
ERROR 105: Management Chip data error 2
[DISPLAY] ERROR 105
AN ILLEGAL USE ERROR
(If the error occurs in Test Mode, “THIS CHIP IS INVALID” is displayed)
[CAUSE] The inserted Management Chip has been used previously and is illegal because its
remaining credits have increased.
[COUNTERMEASURES] Verify again that the Management Chip is correct.
[DISPLAY] Refer to the screen display on the right.
(If the error occurs in Test Mode, “0” is
displayed without an error message.)
[CAUSE] The remaining credits on the Management
Chip counter is “0”.
[COUNTERMEASURES] When this screen appears,
quickly replace the chip with
a new one, or a chip that still
has remaining credits.
Note:This screen only appears when all the chips installed in the reader/writer units have no
remaining credits left.
WARNING DISPLAY FOR MANAGEMENT CHIP EXPIRATION