Segway Pt x2 - Replacing the Infokey Controller Battery

110
Replacing the InfoKey Controller
Battery
Tool Required: Coin or Flathead Screwdriver.
To replace or reseat the InfoKey Controller battery:
1. Remove the InfoKey Controller from the Dock and unscrew the
InfoKey Controller Dock Adapter.
 For more information, see “Docking/Undocking
the InfoKey Controller” on page 116.
2. Using a coin or a flathead screwdriver, unscrew the back cover of
the InfoKey Controller. See Figure 42.
Figure 42. Replacing or Reseating the InfoKey Controller Battery
3. Remove the InfoKey Controller battery.
+
CR2430