Segway Pt x2 - Reading the Battery Charge Level Display

71
English
English
Reading the Battery Charge Level
Display
The horizontal bars on the left side of the InfoKey Controller display
indicate the levels of the charge in the Segway PT Batteries. Figure
24 shows how the Segway PT Battery Gauge on the InfoKey
Controller changes as the Battery is depleted.
Figure 24. InfoKey Controller Display with Battery Charge Being
Depleted
The more charge the Batteries contain, the more horizontal bars are
shown. If the Battery charge level is very low, the Segway PT will
notify you of a pending empty Battery condition prior to initiating
Safety Shutdown.
 For more information, see “Safety Shutdown” on page 55.
Do not ride your Segway PT if there is inadequate charge in the
Batteries (indicated by the unhappy face icon on the InfoKey
Controller and no dark horizontal lines on the Battery Charge display).
Carefully monitor your Segway PT Battery Gauge and be prepared to
step off if your Battery charge becomes completely depleted.
Full Charge Low Charge