Segway x2 SE - Page 86

Segway Personal Transporter SE Service Manual
C–4
Part Number Fastener Type Application Qty/PT Drive Torque
20972-00001
PHCS, M3 x 0.5 x 12, SEMS
Balance Sensor Assembly 4 T-10 1.6 N-m (14 in-lbf)
Front Light Pipe 2 T-10 1.6 N-m (14 in-lbf)
For use when reinstalling a BSA into the original Powerbase Chassis,
. or when reinstalling a Front Light Pipe into the original Console.
20973-00001
PHCS, M3 x 0.5 x 8
CU Board 28 T-10 1.6 N-m (14 in-lbf)
Radio Board 6 T-10 1.6 N-m (14 in-lbf)
Power Board 8 T-10 1.6 N-m (14 in-lbf)
AC Input Filter 5 T-10 1.6 N-m (14 in-lbf)
For use when reinstalling a CU Board into the original Powerbase Chassis,
. or when reinstalling a Radio Board, Power Board, or AC Input Filter into the original Console.
20991-00002
SHCS, M10 x 1.5 x 40 x2 Turf Hub Adapter 8 8 mm 35 N-m (26 ft-lbf)
23517-00001
SHCS, M8 x 1.25 x 16 LeanSteer Frame 2 5 mm 11 N-m (8.1 ft-lbf)
23559-00001
BHCS, M4 x 0.7 x 12, SEMS AC Input Filter, Plug 2 T-20 1.0 N-m (9 in-lbf)
23591-00001
SHCS, M5 x 0.8 x 8 AC Input Filter, Ground 1 4 mm 3.0 N-m (27 in-lbf)
Fasteners
Table C–1: Fasteners (cont.)