Sekonic C-800 User Manual

5. Measuring Light Sources [Measurement Screen]
When you return to the Measurement screen,
select Range L
( ) or Range H ( )
Range L (
Range H.
Range H (
5.
Press the Measuring Button .
The meter will enter measurement standby mode.
The [Measuring Mode] icon will blink for 90 seconds when measuring.
The display illumination will dim when the measuring button is pressed as the display
illumination can affect the reading. This is normal.
the display will return to measurement standby mode.
To cancel standby mode, touch the screen or press the Menu Button
.
take measurements again, press Measuring Button again.
Measurement in Cordless Flash Mode is complete.
Light Selection Ring
Measuring Button
Range L
Range H

Sekonic C-800 Specifications

General

Dimensions (WxDxH)	73 x 183 x 27 mm
Interface	USB 2.0
USB powered	Yes

Weight and Dimensions

Weight	230 g