92
5. Measuring Light Sources [Measurement Screen]
CAUTION
burns.)
temporarily affect vision.)
burns or negative effects on vision, please handle with care.
When using Cordless Flash Mode, the LCD screen backlight dims during
measurement, and the LCD backlight is illuminated for only 3 seconds after
measurement. To cancel standby mode, touch the screen or press the Menu
Button
.
In case of the following, please follow "5-4 Measurement in Cord (PC) Flash Mode"
(
P93)
•
•
•
If the Light Receptor
detects a sudden and bright change in lighting intensity,
the meter may mistakenly take a measurement.
•
detect the light when used in Cordless Flash Mode.
stand, tripod or similar support using the Tripod Socket .
bright enough, or if the color temperature is out of the measurement range, when the
Measuring Button is pressed. In this case, adjust the brightness or color temperature of
light source, or switch the light range. (
)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
