171
7. Meter Settings [Setting] Screen
2.
Turn the Light Selection Ring to set to the dark calibration
position
( ).
The status bar will display the dark calibration Icon.
3.
Touch the [Yes] button.
"Dark calibration in progress. Please wait" and the status bar will appear while
calibrating.
To return to the Setting screen without performing dark calibration, touch the [No] button.
While the message "Dark calibration in progress. Please wait." or the
progress bar is displayed, do not turn the power off.
The dark calibration is completed.
Light Selection Ring
Dark Calibration
Process Screen
Dark Calibration
[No] Button[Yes] Button
Status Bar
To Next Page
Loading...
