Sekonic RT-GX - Page 30

22
2. About Godox Radio System
●
7.
Touch [ALL] Button, then press the Measuring Button 6.
Point the meter (lumisphere) at the camera from the position of subject
to make a measurement.
All modeling lamp of the selected Group will re, and the total exposure (F-stop) will be
displayed in the main display. (

Figure 2. of Piv)
8.
With [ALL] Button selected, touch [+] or [-] Button.
You can adjust the total power level while the lighting ratio of each Group is being
xed.
[Modeling Lamp Power
Control Screen]
[ALL] Button
[+] Button[-] Button
[Flash Power Control] Icon
[Modeling Lamp Power
Control Screen]
[Modeling Lamp Power
Control Screen]
Switch from
Retracted
Lumisphere
to Extended
One
Main Display
(Measurement
with Extended
Lumisphere)
[ALL] Button
[ALL] Button
Main Display
(Measurement
with Retracted
Lumisphere)