Sekonic SR-3500 - Setting Parity

To Next Page

To Previous Page

-35-

(3) Use the

and

DOWN

switches to select [Character Bit Length] setting,

and press the

FEED/ENTER

switch.

(“



” mark ﬂ ashes in the ﬁ rst column of the ﬁ rst line on the LCD.)

(4) Use the

and

DOWN

switches to set the value.

(5) Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

(6) Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Character bit length

value

• 7 • 8

2-3.

Setting parity

(1) Press the

switch to enter the menu mode.

(2) Use the

and

DOWN

switches to select the following parameters,

and press the

FEED/ENTER

switch.

(3) Use the

and

DOWN

switches to select [Parity] setting,

and press the

FEED/ENTER

switch.

(“



” mark ﬂ ashes in the ﬁ rst column of the ﬁ rst line on the LCD.)

(4) Use the

and

DOWN

switches to set the value.

(5) Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

(6) Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Parity setting values

• None

• Odd • Even

Connecting to a computer



RS-232C

SR-3565(E).indd35SR-3565(E).indd35 2007-8-1610:19:122007-8-1610:19:12

Main Page

Sekonic SR-3500 - Setting Parity

Table of Contents

Related product manuals