Sekonic SR-3500 - RS-232 C Interface Setup

-32-
Connecting to a computer

USB
2.
Interface settings
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
UP
and
DOWN
switches to select the following parameters,
Device ID
setting value
0-126
and press the
FEED/ENTER
switch to begin [Device ID] setting.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
Set any number using the
UP
and
DOWN
switches.
(4) Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
(5) Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
SR-3565(E).indd32SR-3565(E).indd32 2007-8-1610:19:022007-8-1610:19:02