Sekonic SR-3500 - Printing Position Adjustment

-78-

Printing position adjustment
1.
Turn the power off and remove the power cord from the outlet.
2.
Open the front door of the stacker unit.
Front door
3.
Disconnect the printer connector.
Connector
Printer
4.
Loosen the printer fi xing screw to remove it.
Fixing screw
Options Stacker unit

Printing position adjustment
SR-3565(E).indd78SR-3565(E).indd78 2007-8-1610:20:532007-8-1610:20:53