Sekonic SR-3500 - Displaying Various Information; Displaying the Version

-64-
Displaying various information
This section explains how to display various setting information.

Displaying the version
This displays the versions of the “main body unit,” “front side reading unit,” “back side reading
unit,” “stacker unit,” “printer unit,” “barcode unit” and other items. (“Back side reading unit,”
“stacker unit,” “printer unit,” and “barcode unit” display only if they are installed.)
Versions are displayed in a two-digit format.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Version Info.],
and press the
FEED/ENTER
switch.
Note)
If “Version= @@” appears

in the display,contact the store where you
bought.
4.
Use the
UP
and
DOWN
switches to display individual versions.
5.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Displaying various information

Displaying the version
SR-3565(E).indd64SR-3565(E).indd64 2007-8-1610:20:242007-8-1610:20:24