Sekonic SR-3500 - Barcode Reading Position Adjustment

-94-

Barcode reading position adjustment
1.
Turn the power off.
2.
Remove the carrier cover.
Carrier cover
3.
Loosen the barcode unit position fi xing screw, move the barcode unit according
to barcode position, and tighten the screw to secure it.
* The scale on the positioning sticker indicates center of the barcode position
from the edge of the paper(Timing mark side). The barcode position is determined
by aligning the barcode unit position fi xing screw with the scale on the sticker.
4.
Turn the power on.
50
100
1
50
200
(
mm)
Positioning screw
Positioning sticker
Barcode unit
Barcode unit / V • barcode unit / H

Barcode reading position adjustment
SR-3565(E).indd94SR-3565(E).indd94 2007-8-1610:21:092007-8-1610:21:09