Sekonic SR-3500 - Displaying Back Side Reading Sensor Settings

-66-

Displaying back side reading sensor settings
This displays the settings for “sensor pitch” and “sensor type” for the back side reading unit
in this device. (This display is available only when the device has a back side reading unit
attached.)
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Type of Back Reading Sensor] display,
and press the
FEED/ENTER
switch.
4.
Use the
UP
and
DOWN
switches to display the settings.
Sensor pitch
Sensor type
5.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Sensor pitch display
• 0.2 inch • 0.25 inch
• 0.3 inch • 1/6 inch
Sensor type display
• Infra Red
• Visible Red
Displaying various information

Displaying back side reading sensor settings
SR-3565(E).indd66SR-3565(E).indd66 2007-8-1610:20:292007-8-1610:20:29