Sekonic SR-3500 - Page 50

-49-
4.
Use the
UP
and
DOWN
switches to select individual error detection setting values.
(See the previous table for setting values.)
5.
Press the
FEED/ENTER
switch to save individual setting values into memory.
(The fl ashing “

” mark disappears from the LCD.)
6.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Error detection settings
SR-3565(E).indd49SR-3565(E).indd49 2007-8-1610:19:512007-8-1610:19:51