Sekonic SR-3500 - Page 57

-56-
(5) Press the
FEED/ENTER
switch to save the setting value into memory.
(The fl ashing “

” mark disappears from the LCD.)
(6) Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
[Setting example 1]
When the size is set at 3.2mm and the interval is 0.8mm.
[Setting example 2]
When the size is set at 6.4mm and the interval is 5.6mm.
Character pitch
setting values
0.8 - 92.0 (mm)
0.1mm increments
0.8mm
3.2mm 3.2mm
6.4mm
5.6mm
6.4mm
(1) Press the
MENU
switch to enter the menu mode.
(2) Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
(3) Use the
MENU
and
DOWN
switches to select [Character Pitch] setting,
and press the
FEED/ENTER
switch.
(“

” mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
MENU
and
DOWN
switches to set the value.
Printer settings

SR-3500,SR-6500 mode
SR-3565(E).indd56SR-3565(E).indd56 2007-8-1610:20:062007-8-1610:20:06