Selco WF 110 - Page 18

19
ENGLISH
USE AND MAINTENANCE MANUAL
This manual is an integral part of the unit or machine and must accompany it when it changes location or is resold.
The user must assume responsibility for maintaining this manual intact and legible at all times.
SELCO s.r.l. reserves the right to modify this manual at any time without notice.
All rights of translation and total or partial reproduction by any means whatsoever (including photocopy, film, and microfilm) are reser-
ved and reproduction is prohibited without the express written consent of SELCO s.r.l.
Edition ‘03
INDEX
1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . .20
1.1 General precautions . . . . . . . . . . . . . . . . . . . .20
1.2 Technical specifications . . . . . . . . . . . . . . . . . .20
1.3 Front control panel . . . . . . . . . . . . . . . . . . . . .21
1.3.1 Operation . . . . . . . . . . . . . . . . . . . . . . . . .22
1.3.2 Selection of synergic curve in MIG procedure .23
1.3.3 Quick menu . . . . . . . . . . . . . . . . . . . . . . . .24
1.3.4 Program storage menu . . . . . . . . . . . . . . . . .25
1.3.5 Program description writing menu . . . . . . . . .25
1.3.6 Set-up menu . . . . . . . . . . . . . . . . . . . . . . . .25
1.3.7 WF 110 default settings . . . . . . . . . . . . . . . .26
1.3.8 WF 111 default settings . . . . . . . . . . . . . . . .29
1.3.9 Remote control setting menu . . . . . . . . . . . .31
2.0 DESCRIPTION OF THE APPARATUS . . . . . . . . . . .32
3.0 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . .32
4.0 POSSIBLE PROBLEMS . . . . . . . . . . . . . . . . . . . . . .33
5.0 ACCESSORY KIT . . . . . . . . . . . . . . . . . . . . . . . . . .33