User ManualUser Manual
1-1 Inspection
Each inverter is subjected to strict quality control before being
shipped from the factory, and is made of enhanced anti-collision packaging.
After the customer unpacks, please check the following items:
1-2 Illustrations for nameplate of FD300
Chapter 1
PRODUCT INFORMATIONCONTENTS
Contents
1
8. Inspection and maintenance
8-1 Maintenance
8-2 Inspection and replacement of consumable parts
8-3 Storage
8-4 Inverter warranty
9. Appendix
Appendix A Modbus communications
Appendix B Brake resistor selection
Appendix C Appearance dimensions and installation dimensions
4. Keypad operation
4-1 Description of the keyboard panel
4-2 Function code modification, view instructions
7. Faults and Solutions
7-1 Fault alarm and Solutions
7-2 Common faults and solution
6. Parameter Instruction
P0 Basic function
P1 First motor parameter
P2 Vector control parameter
P3 V/F control parameter
P4 Input terminal
P5 Output terminal
P6 Start and stop control
P7 Keyboard and display
P8 Accessibility
P9 Failure and protection
PA Process control PID function
PB Swing frequency, fixed length and counting
PC Multi-segment instruction and simple PLC function
PP User password
A0 Torque Control Function
A5 Control optimization parameter
A6 Group AI curve setting
AC AIAO Correction
1. Production information
1-1 I nspection
1-2 Name plate
1-3 Specification of inverter
2. Installation
2-1 Installation environment
2-2 Installation method and space
3. Wiring
3-1 Peripheral device connection
3-2 Standard wiring diagram
3-3 Main circuit terminal description
5. Function parameter
5-1 Basic function parameter
5-2 Monitoring parameter
• Check the package for instructions (with certificate and warranty card).
• Check the inverter nameplate and confirm that it is the product model
you ordered.
• If you ordered any option for the drive, please check to confirm.
• Check if the inverter is damaged during transportation.
MODEL : FD300–3–100-C-CE
POWER : 10HP/7.5KW
INPUT : 10PH 415V ±15% 50/60Hz
OUTPUT : 0–400Hz 17 A
0 1 9 0 5 9 0 3 7
HIGH POWERED INVERTER
Selec Control Pvt. Ltd
BAR CODE
Product Model
Power
Output Power Specification
Input Power Specification
Item Number
Illustrations for product model of FD300
MODEL : FD300 - 3 - 100 - C- CE
Product Series
3 Phase 10.0HP
RS485
Certification
To Next Page
Loading...
Need help?
General
