To Next PageTo Next Page
Need help?Do you have a question about the Selec ATSEL FD300 and is the answer not in the manual?
Details on checking the inverter package and contents after unpacking.
Visual guide to the inverter's nameplate details and model illustration.
Detailed specifications and ratings found on the inverter's nameplate.
Guidelines for selecting a suitable location for inverter installation, considering environmental factors.
Instructions on how to properly mount the inverter and required clearance for cooling.
Diagram and notes for connecting external peripheral devices to the inverter.
Explanation of the main circuit terminals on the inverter for power connections.
Guidance on correctly wiring the inverter's output terminals to the motor.
Instructions for connecting braking resistors or external brake units for deceleration.
Importance and method of properly grounding the inverter for safety and noise reduction.
Details on the control circuit terminals for external commands and signals.
Overview of the inverter's keypad layout, buttons, and indicator lights.
Steps and procedures for navigating, viewing, and modifying inverter function codes.
Method for switching and displaying various inverter operating status parameters.
A comprehensive table listing function codes, names, ranges, and defaults.
Configuration of fundamental inverter settings like GP type, speed control mode, and frequency sources.
Settings related to the motor's nameplate data for optimal control performance.
Settings for the V/F control mode, including voltage/frequency curves and boost.
Settings for motor start, stop, acceleration, deceleration, and braking control.
Configuration of various protection mechanisms, fault detection, and auto-reset settings.
Overview of parameters for monitoring inverter operating status and values.
Detailed descriptions of inverter fault codes, their causes, and troubleshooting steps.
Common fault phenomena, possible causes, and recommended solutions for quick diagnosis.
Guidelines for regular daily and periodic inspections of the inverter.
Information on identifying and replacing components with limited service life.
Recommendations for proper storage conditions to maintain inverter integrity.
Details on warranty coverage, repair services, and conditions for maintenance fees.
Information on Modbus communication protocol, hardware interface, and data structure.
Guidance on selecting appropriate braking resistors based on inverter power and load conditions.
Physical dimensions and mounting hole specifications for different inverter models.
General