ENGLISH GERMAN FRENCH SPANISH DUTCH
19
SVENSKA
B. Assemble 6pcs of M4x20 bolt at the x bracket
Assemble bolts Re-apply silicone to cover bolts assembled
B-4
B-2
Put back the mounting plate on the silicone
applied and make 6holes (2mm) with power drill
B-3
B-1
Apply silicone on the holes
C. Apply siliconebetween x bracket and friction tape
Remove friction tape and get dry
C-4
C-2
Apply silicone around mounting plate
C-3
C-1
Tidy the area silicone applied
The image you will see. Place main unit on the
top of xed plate
To Next Page
Loading...
