10Upad
24
6.3 GPS Navigation
If you pair a Bluetooth GPS to the 10Upad as described in
section 5.2,
“Second Mobile Phone Pairing - Second Mobile Phone, GPS, and
SR10”
, you can listen to GPS instructions wirelessly. Tap the (+) Button
or the (-) Button to adjust volume. The GPS voice instruction interrupts
intercom conversation but it is automatically reestablished after the
GPS voice instruction ends.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10Upad Bluetooth intercom
simultaneously by using the Sena SR10, a Bluetooth Two-way Radio
Adapter (please refer to
section 5.2, “Second Mobile Phone Pairing -
Second Mobile Phone, GPS, and SR10”
). Incoming audio from the
two-way radio will not interrupt an intercom conversation but is heard
in the background. This is useful when you have an intercom
conversation with a passenger on the back seat and use a two-way
radio for group communication with other motorcycle riders.
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
The Bluetooth audio device must be paired with the 10Upad by
following the
“Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device”
procedures described in the
section 5.1
. The 10Upad
supports the Audio/Video Remote Control Prole (AVRCP), so if your
Bluetooth audio device also supports the AVRCP, you can use the
10Upad to remotely control music playback. Not only can you adjust
the volume but you can also use functions such as play, pause, next
track and previous track.
1. To play or pause music, press the Center Button for 1 second until
you hear a double beep.
2. To adjust the volume, tap the (+) Button or the (-) Button.
3. To track forward or track back, press and hold the (+) Button or
the (-) Button for 1 second until you hear a mid-tone single beep.
To Next Page
Loading...
