Sena 10Upad - Voice Prompts and FM Settings

10Upad
45
14.10 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable/Disable Tap the Center Button
You can disable voice prompts by conguration setting, but the
following voice prompts are always on.
– Voice prompts for conguration setting menu
– Voice prompts for battery level indicator
– Voice prompts for speed dial
– Voice prompts for FM radio functions
14.11 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default Disable
Enable/Disable Tap the Center Button
RDS AF allows a receiver to re-tune to the second frequency location
when the rst signal becomes too weak. With RDS AF enabled on the
receiver, a radio station with more than one frequency can be used.
14.12 Enabling/Disabling FM Station Guide
Voice Prompt
“FM station guide”
Factory Default Enable
Enable/Disable Tap the Center Button
When FM Station Guide is enabled, FM station frequencies are given
by voice prompts as you select preset stations. When FM Station
Guide is disabled, the voice prompts on FM station frequencies will
not be given as you select preset stations.