10Upad
28
8.2.2 Ending Three-way Intercom
You can completely terminate the conference intercom or just
disconnect an intercom connection with one of your active intercom
friends.
1. Press the Center Button for 1 second until you hear a beep to
terminate three-way conference intercom completely. It terminates
both intercom connections with (B) and (C).
2. Tap or double tap the Center Button to disconnect intercom
connection with one of the two intercom friends accordingly. For
example, by single tapping the Center Button, you can terminate
the intercom connection with just the rst intercom friend (B).
However, you still have the intercom connection with your second
intercom friend (C).
Center Button Operation Result
Press for 1 second Disconnect (B) & (C)
Single tap Disconnect (B)
Double tap Disconnect (C)
End Three-way Intercom
8.3 Four-way Intercom
8.3.1 Starting Four-way Intercom
You can have four-way conference intercom with three other 10Upad
users by adding one more intercom participant to the three-way
intercom. While you are having a three-way intercom as above in
section 8.2
,
“Three-way Intercom”,
a new participant (D), who is an
intercom friend of your intercom friend (C), may join the conference
intercom by making an intercom call to your intercom friend (C).
Please note that in this case, the new participant (D) is an intercom
friend of (C), not of you (A).
8.3.2 Ending Four-way Intercom
As is the case for a three-way intercom, you can completely get out of
the four-way conference intercom or just disconnect a single intercom
connection.
1. Press the Center Button for 1 second until you hear a beep to
terminate a four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends
(B) and (C).
To Next Page
Loading...
